BASKET £0.00

Spectra Precision DG813 Pipe Laser

When speed, improved reliability, robustness and long lasting performance are required for Pipe Laying the Spectra Precision DG813 is the answer.

Completely waterproof, with large self-levelled grade range, the DG813 is so fast, so smart and so easy to use that it is an unsurpassed laser tool for pipe laying. Benefiting from the latest technology developed by Spectra Precision, the DG813 delivers an unprecedented performance when laying pipes. The length of the DG813 has been reduced to make it easier to set up the lasers into tight inverts in the manhole. The DG813 has a grade range from -12% to 40% and is fully self-levelling over the entire grade range. Even the cross axis is fully compensated? – providing quick set up and peace of mind that the laser will be level without having to adjust at the bottom of the invert.

The DG813 works over a distance of 150m (500ft) providing full operation in a single set-up between manholes. The new RC803 remote control provides full function control and utilizes infra-red light in the pipe for up to 150 meter (500 feet) control. For ?over-the-top? setups, the remote utilizes radio communications up to a distance of 130 meter (430 feet). Flexible power options provide 40 hours operating time with NiMH rechargeable batteries and 50 hours with alkaline batteries. Alkaline batteries can be used directly at the laser without a separate battery pack. An additional car charger is available for work in remote areas.

Large graphical user interface can be seen easily when the laser is in a manhole. All functions are available via graphical menu which makes it simple and easy to use ? no secret button pressing and short learning curve means it can be handed to anyone in your crew with little or no training. The same graphical user interface is used at the RC803 remote control.

Comes with:?Remote Control, Spot Finder, Pipe Target with 2 Plates, Centering Plate 200mm, Charger, Battery Pack, Carry Case

(£3,600.00inc VAT)



Features and Benefits

New reduced length allows easy set-up even in tight inverts

Large, bright, graphical user interface makes the screen easier to see and use when in or out of the pipe. Same graphical user interface can be seen on the remote ? what you see on the laser you see on the remote.

Self levelling range of -12% to 40% over the entire grade range

Cross axis compensation provides a quicker more accurate set-up as the laser does not have to be level in the pipe ? place it in the pipe, it levels, you work.

Bright visible beam that works up to 150m (500ft)

IP68 protection (dust and waterproof)

The DG813 has flexible power options that provide 40 hours operating time (NiMH rechargeable batteries with worldwide charger) and 50 hours (alkaline batteries). Alkaline batteries can be used directly in the laser without a separate battery pack. Additional car charger can be purchased to keep you working even when out in remote areas.

Line-Set/Check ? allows the user to align the laser to the manhole quickly and easily to set direction. The beam will go up to 100% allowing easy alignment even in short trenches

Line Scan ? provides a quick alignment to the centre of the target for the second day setup

Line Alert- notifies the user if the set-up is disturbed eliminating costly re-work from errors

RC803 remote works via radio 130m (430ft) or infra-red 150m (500ft) for both ?Over the Top? set-up and in pipe/trench set-up.

With SF803 Spot Finder, smart functions are available:

Spot Align ? automatically aligns the DG813 to the centre of the Spot Finder in the pipe or to the direction of the manhole when used in a deep, short trench or for ?Over the Top? set up.

Spot Match ? a great tool for checking that pipe has been installed to the correct grade or for finding the grade of existing pipe work. Can also be used to calculate the grade between manholes.

SpotLok ? can be used to easily establish a steep slope reference at mountain areas or to lock the beam in a desired position for applications such as solar farms where the beam could be subject to drift.

Spot Search ? can be used to manually locate the beam over long distances out of the trench when using the ?Over the Top? application


© 2018 SEP (Site Engineering Personnel) Ltd. All Rights Reserved.
Website by Mayfly
cards accepted